34” BOS Bulk Bin

Instructions & Standard Operating Procedures

Overview

The 34” PVpallet BOS Bulk Bin (PVPB4845-34) is a stackable, collapsable box with a pallet style base for optimal lifting and moving. These robust containers are made from post-industrial HDPE and are ideal for shipping and storing solar balance of system components in a sustainable way. 

Specifications

  • Exterior Dimensions (L x W x H): 48.0” x 45.0” x 33.8”, collapsed height: 12.75”

  • Interior Dimensions (L x W x H): 44.5” x 41.5” x 27.8”

  • Total Pallet Weight: 118 lb

  • Max Load Capacity: 1,800 lb (not designed for loose, bulk-loaded items)

  • Fill Line: 26.8” (fill-line molded on inside of walls)

  • Inside Volume: 28.6 cu ft (calculated with no top cap)

  • Access Doors: Two access doors are standard on 48” walls, but options are available

Shipping

  • Bins Only—53’ Trailer Quantity: 78 erect (26 stacks of 3 bins), 234 collapsed (26 stacks of 9 bins)

  • Bins with Lids—53’ Trailer Quantity: 78 erect, 200 collapsed (22 stacks of 9 bins,
    2 stacks of 50 lids, 2 stacks of 50 lids plus 1 bin)

  • Truck Stack Height: 3 high erect (99.4”), 9 high collapsed (106.7”), 50 lids per pallet (80”)

BOS Bin Inspection & Cleaning

Cleaning Tips

  • A power washer is recommended to clean bins.

  • Use warm water under 220°F; excessively hot water can damage bins.

  • Harsh detergents can damage bins; instead, use water or a mild degreaser like Simple Green.

  • After cleaning, ensure no water is left standing in the sidewalls. This can freeze in cold temperatures and compromise the functionality of the bins. A leaf blower works well to dry bins after washing.

  • A wash bay with a closed loop water system is a great way to minimize water usage.

Inspection Checklist

  • Fully assemble and collapse each bin to ensure latches and hinges are functioning properly.

  • Completely open each access door to ensure hinges and latches are functioning properly.

  • Inspect each fork strap to make sure it has not been broken or damaged.

  • Inspect each corner of the bin to make sure it is still intact; corners can get damaged during handling and compromise safety when stacking full containers.

  • If any damage is visible, the bulk bin should not be used.

Helpful Tips

  • The 48” side of the BOS bin is identifiable by the colored latches and access doors. Both the 45” and 48” lengths are also imprinted in the lower right corner of the bin base.

  • 34” high BOS bins should not be stacked more than 3 high in the warehouse. If you want to stack higher, please consult PVallet about your specific application.

  • PVpallet BOS bulk bins are not designed for loose bulk loads. The outward pressure can cause fractures in the components and misalignment of latches.

  • Visually from the side, the walls may look as if they are flexing outward. They are not.  The walls are sculpted to receive the access doors in their vertical hanging position, minimizing how far out the access doors stick out to reduce accidental collisions.

  • Banding requirements for transit should be assessed by each customer and/or specific project.

  • Bulk boxes are not affected by water exposure.

  • If exposed to U.V., the color will degrade well before the plastic starts losing its properties; discoloration does not mean lessened performance.

  • If stored outside, please make sure BOS bins are clean and free of any debris/dirt that would impede the movement and proper engagement of the moving parts.

  • If any damage is visible, the bulk bin should not be used.

Warning: As all products can have unique loading patterns and shifting characteristics, PVpallet recommends that customers perform their own load capacity testing. PVpallet’s standard is to target and test to the maximum weight limits as shown in the specifications. PVpallet does not warrant that all loads will perform the same as lab testing.

PVpallet® warrants its containers for proper fit, form, and function for a period of one year from date of shipment by PVpallet. If within such period a container is proven to be defective in functionality from manufacturing defects, such product shall be repaired or replaced. This warranty does not include damage due to normal material handling methods (e.g. forklift damage, etc.). Customer is responsible for all freight charges.

 Questions? We’re here to help.

Phone: 877-787-2553 // Email: help@pvpallet.com