PVpallet Series X.L

Instructions & Standard Operating Procedures

Overview

PVpallet Series X.L (PVP000031.XL) extends the base of our Series X model to fit larger solar modules. Third party testing on this design ensures the same quality standards as our other product lines. This stackable, collapsable pallet includes walls on the 48” side for increased load protection.

Specifications

Exterior Dimensions (L x W x H): 96.5” x 48” x 50.1”, collapsed height: 10.5”
Interior Dimensions (L x W x H): 90” x 44.8” x 42.2”*, walls must be set to max width only
Side Wall Dimensions (L x W x H): 44.9” x 3.25” x 42.2”
Total Pallet Weight: 320 lb total (Wall: 53 lb, Base: 214 lb)
Module Capacity: 32 (35 mm), 27 (40 mm)
Max Load Capacity: 2,000 lb** (see Figure 1 below)
Max Total Cargo Weight Stacked Above Base Pallet: 2,000 lb, max 2-high stack**

Shipping

53’ Trailer Quantity: 24 erect (12 stacks of 2 pallets), 120 collapsed (12 stacks of 10 pallets)
Always follow banding guidelines for loads in transit. When transporting pallets on open trailers or truck bodies, always securely fasten the load to the bed with straps of sufficient strength.

Product Notes & Reminders

Series X.L pallets should not be stacked more than 2 high.
As all products can have unique loading patterns and shifting characteristics, PVpallet recommends that customers perform their own load capacity testing. PVpallet’s standard is to target and test to the maximum weight limits as shown in the specifications. PVpallet does not warrant that all loads will perform the same as lab testing.
Always follow banding requirements for transit.
Series X.L pallets are not affected by water exposure.
If exposed to U.V., the color will degrade well before the plastic starts losing its properties; discoloration does not mean lessened performance.
If stored outside, make sure Series X.L pallets are clean and free of any debris/dirt that would impede the movement and proper engagement of the moving parts.

Damage Statement

If any damage is visible, the pallet should not be used. Using a damaged product can pose serious risks, including potential injury or harm. Inspect each unit carefully before use and discontinue using the product immediately if you observe any of the following:

Cracks, dents, or visible structural damage.
Malfunctioning or warped components or parts.
Loose brace arms or walls.
Faded or illegible safety labels and instructions (when applicable).

*Standard extension maximum interior length is 90”; custom lengths available upon request. Dimensions may vary in extreme temperatures.

**As all products can have unique loading patterns and shifting characteristics, PVpallet recommends that customers perform their own load capacity testing. PVpallet’s standard is to target and test to the maximum weight limits as shown in the specifications. PVpallet does not warrant that all loads will perform the same as lab testing.

PVpallet® warrants its containers for proper fit, form, and function for a period of one year from date of shipment by PVpallet. If within such period a container is proven to be defective in functionality from manufacturing defects, such product shall be repaired or replaced. This warranty does not include damage due to normal material handling methods (e.g. forklift damage, etc.). Customer is responsible for all freight charges.

Helpful Videos

The videos below are based on the Series X model. Some differences may apply when using Series X.L—including stacking and wall adjustability. Always refer to the downloadable instructions for Series X.L at the top of this page as the standard for use.

Featured